Notice: curl_setopt(): CURLOPT_SSL_VERIFYHOST no longer accepts the value 1, value 2 will be used instead in /home/admin/web/eastrussia.ru/public_html/gtranslate/gtranslate.php on line 101
At the Progress plant in Primorye, a robotic complex for production of the Ka-62 helicopter is prepared for operation - EastRussia | Far East

Irkutsk
Ulan-Ude

Blagoveshchensk
Chita
Yakutsk

Birobidzhan
Vladivostok
Khabarovsk

Magadan
Yuzhno-Sakhalinsk

Anadyr
Petropavlovsk-
Kamchatsky
Moscow

This text is translated into Russian by google automatic human level neural machine.
EastRussia is not responsible for any mistakes in the translated text. Sorry for the inconvinience.
Please refer to the text in Russian as a source.

At the "Progress" plant in Primorye, a robotic complex for the production of the Ka-62 helicopter

Readiness for the work of the robotic complex for the production of polymer composite parts for the new civilian helicopter Ka-62 will be checked today at the Progress plant in the city of Arsenyev, Primorsky Krai, by developers from the Far Eastern Federal University (FEFU) and the management of the Helicopters of Russia holding that will be present at the trial Start-up of the complex

At the factory
This was told by the head of the press service of the FEFU Alexei Magalyas.

According to TASS, the robotic complex was designed and assembled by experts of the FEFU Engineering School. It can process more than 250 types of parts up to six meters in size from 22 types of composite materials in a hydroabrasive process.

The complex consists of a robot, a high pressure generation system, a separate water treatment and filtration system, a technological complex control system that stores information on the types of parts and types of materials. In this case, the robot can independently use the laser scanner to recognize the lines along which it is necessary to cut out the parts.

"We offered waterjet cutting: a jet of a mixture of water and abrasive material, supplied under pressure of 4000 atmospheres and at a speed of about three speed of sound, allows you to make the necessary slots in details in strictly controlled limits. The robot manipulator itself is engaged in the process, the "arm" of which has five degrees of freedom, and the radius of its working zone is almost two meters, "Konstantin Zmeu, head of the department of industrial production technologies at the Engineering School of the Far Eastern Federal University, said about the technical details of the complex.

Creation of the complex was carried out according to the project of modernization of the plant "Progress" and took about three years. The total funding for the three-year project is 405 million rubles: 220 million sent the plant and another 185 million rubles provided the federal budget.

Ka-62 is a new medium Russian multi-purpose helicopter, which will be produced at the plants of the Russian Helicopters holding, including in Primorye. The body of the new helicopter will consist of more than half of non-metallic parts - these are complex composite materials made of carbon fiber, metals, including titanium, fiberglass - the entire 22 type.